Table of Contents
Advertisement
Quick Links
QuickShifter easy
Supplementary Manual
Royal Enfield Himalayan ABS 2020- (iQSE-1 + QSH-F2B)
Secure the bike on a stand.
Remove the seats.
Remove the side covers from the airbox.
Remove the fuel tank.
Locate the fuel injector connector under
the fuel tank.
Connect the QSH connectors in-line with
the injector connectors.
(Make sure the QSH plugs marked with RED
square are connected, and leave the
unmarked coupler unused. You may connect
the male and female plugs of the unused
pair together or isolate with tape.)
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
1/2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HealTech Electronics iQSE-1
Summary of Contents for HealTech Electronics iQSE-1
- Page 1 QuickShifter easy Supplementary Manual Royal Enfield Himalayan ABS 2020- (iQSE-1 + QSH-F2B) Secure the bike on a stand. Remove the seats. Remove the side covers from the airbox. Remove the fuel tank. Locate the fuel injector connector under the fuel tank.
- Page 2 QuickShifter easy Supplementary Manual Royal Enfield Himalayan ABS 2020- (iQSE-1 + QSH-F2B) Connect the QSH Black wire terminal to the battery negative terminal. Mount the QSE sensor. (Place the sensor in the rod as shown. Tighten the nut by hand fully and then by a 1/4 turn using a wrench but maximum to about 6 Nm.)
Need help?
Do you have a question about the iQSE-1 and is the answer not in the manual?
Questions and answers