Table of Contents
Advertisement
Quick Links
1. Foreword
Congratulations on your purchase of a HealTech QuickShifter easy - next generation
standalone quickshifter module.
The QSE is the only quickshifter module on the market which utilizes Bluetooth
technology and Android app for setup and verification. Can even be disabled with a few
taps to restore factory condition e.g. for servicing the bike.
The unit comes with a unique sensor which is extremely simple to install and works on
all motorcycles (also with reverse/race shift pattern). It's a robust design, has no
moving parts and works in every situation. Sensitivity (threshold) can be adjusted
precisely to your riding style.
2. Installing the app and making the initial settings
1.
Install the module as per the supplied Install Guide.
2.
Install the QuickShifter easy free app on your Android phone or tablet.
In the Google Play Store, search for HealTech to find the app.
Alternatively, follow this direct link:
https://play.google.com/store/apps/details?id=com.healtech.quickshiftereasy
3.
Turn the ignition key ON.
The QSE LED light should light up in GREEN color then change to solid RED. This
confirms that the unit has power and ready for use.
4.
Press Menu → Connect to connect to a new QSE module. The code for Bluetooth
pairing: 4325
If, for some reason you can not pair with the module from the app, try it under the
phone's Bluetooth connections. If you are a dealer and have more QSE modules
paired, you can remove them with a long press, when the (x) sign appears.
5.
When the module is connected for the first time, it is advised to tap the Reset to
defaults button under the Settings screen as it sets the typical values.
6.
Start the engine and let it idle.
Press Menu → Settings and setup/verify the Engine speed. Refer to chapter 4.
Make sure the QSE LED light turned to solid GREEN, which means the unit receives
the RPM signal correctly.
7.
The main screen shows nine RPM ranges. Go to Settings and set the First RPM
and Last RPM values to suit your bike.
There is no ignition cut-off below the First RPM, so we recommend setting it well
above idle speed to ensure the engine won't stall when you put the gearbox in first
gear.
8.
Adjust the Sensor threshold.
Refer to chapter 4.
QSE_UsersGuide_en.pdf
http://www.healtech-electronics.com
QuickShifter easy
User's Guide
[rev. 004]
- 1 -
Advertisement
Table of Contents
Related Manuals for HealTech Electronics QuickShifter
Summary of Contents for HealTech Electronics QuickShifter
- Page 1 Congratulations on your purchase of a HealTech QuickShifter easy - next generation standalone quickshifter module. The QSE is the only quickshifter module on the market which utilizes Bluetooth technology and Android app for setup and verification. Can even be disabled with a few taps to restore factory condition e.g.
- Page 2 Set the engine cut-off times on the main screen for different RPM ranges. Start with the default cut-off times and adjust if necessary. If your bike has less than 4 cylinders, typically larger values are needed. If the gearbox makes a strange noise or does not take a gear, increase the values.
- Page 3 Note: The PIN code is not related to the Bluetooth pairing code. Sensor type: Select whether you use the QSE sensor or a standard push or pull QuickShifter sensor from a different manufacturer, such as the Nextup switch. You may also use a handlebar mounted switch, like the passing light switch to trigger the cut-off when racing rules do not allow a foot operated QuickShifter.
- Page 4 5. Troubleshooting Make sure you are running the latest app version (Menu → About). Otherwise, update from the Google Play Store. On some phones, you need to press a button longer to open the menu. Start the engine and let it idle. Make sure the QSE LED light turned to solid GREEN.
Need help?
Do you have a question about the QuickShifter and is the answer not in the manual?
Questions and answers