Table of Contents
Advertisement
Available languages
Available languages
Figure 10 Profibus DP card (YAB103 since December 2013) connections
1 Wiring information—Profibus outputs
2 Profibus DP card
3 Terminal Block–Refer to
assignments
Table 6 Profibus DP card (YAB103) terminal descriptions
Terminal
1
2
3
4
5
6
3.2.7 Remove an expansion card
Remove an expansion card if the probe connectors are blocked. Refer to the SC controller Profibus
DP/V1 network card documentation.
Note: The compact connectors are a very tight fit and the connections can easily break. Do not apply too much
force to remove the compact connectors.
1. Delete the card in the SC controller.
2. Remove power from the instrument.
3. Remove the probe module cover. Refer to
4. Disconnect all of the wires from the card.
5. Remove the screws on the card.
6. Remove the card.
20 English
Table 6
for terminal
Description
B2 out
A2 out
5 V
0 V
B1 in
A1 in
Remove the cover
4 Network termination activated–last device on
network
5 Network termination deactivated–other
devices on network after this device
on page 12
Wire color
Red
Green
Not used
Not used
Red
Green
Advertisement
Table of Contents
