Hach SC1500 User Manual page 11

Devices
1200-S sc
3400 sc
3700 sc
3798 sc
ANISE sc, A-ISE sc,
N-ISE sc
CL10 sc
LDO sc
SOLITAX sc
NITRATAX sc
SONATAX sc
pHD (pH and Redox)
TSS sc
UVAS plus sc
ULTRATURB
seawater sc
CL17sc
TU5300/TU5400
SS7 sc
AMTAX sc
PHOSPHAX sc
PHOSPHAX LRP sc
3.2.2 Electrostatic discharge (ESD) considerations
Potential Instrument Damage. Delicate internal electronic components can be damaged
by static electricity, resulting in degraded performance or eventual failure.
Refer to the steps in this procedure to prevent ESD damage to the instrument:
• Touch an earth-grounded metal surface such as the chassis of an instrument, a metal conduit or
pipe to discharge static electricity from the body.
Table 2 Manufacturer-approved connection devices
Description
For devices with low power
consumption: 60 W
maximum total consumption
is permitted.
For devices with low power
consumption: 60 W
maximum total consumption
is permitted.
For devices with low power
consumption: 60 W
maximum total consumption
is permitted.
For devices with low power
consumption: 60 W
maximum total consumption
is permitted.
For devices with high power
consumption: 1000 VA
maximum total consumption
is permitted.
N O T I C E
Power Controller connection
consumption
per device
< 3.5 W Use the device
connector. Refer to
Figure
< 5 W
< 15 W
< 20 W
< 500 W Use the AC power
outlets. Refer to
Figure
6, item 3.
6, item 5.
English 11