Table of Contents
Advertisement
Postponing the update
After the washing machine is switched
on, appears on the time display.
Touch the sensor control.
The running time of the selected pro-
gramme appears on the time display.
The next time you switch on the wash-
ing machine, you will be prompted to
start the update again.
Switching off WiFi
Turn the programme selector to the
MobileStart programme.
appears on the time display.
Press and hold sensor control
until the countdown on the time dis-
play has finished.
appears on the time display.
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a used
washing machine is being put into
operation. This is the only way to en-
sure that all personal data has been
removed and the previous owner will
no longer be able to access the wash-
ing machine.
A new connection has to be set up in
order to use the Miele@home setting
again.
Programmable functions
Copyrights and licences for the
communication module
For the purpose of operating and con-
trolling the communication module,
Miele uses proprietary or third-party
software that is not covered by open
source licensing terms. These items of
software/software components are pro-
tected by copyright. The copyrights held
by Miele and third parties must be re-
spected.
Furthermore, this communication mod-
ule contains software components
which are distributed under open source
licence conditions. The open source
components contained in the appliance
along with the corresponding copyright
notices, copies of the licensing terms
valid at the time, and any further inform-
ation can be accessed locally via IP us-
ing a web browser (http://<IP address>/
Licenses). The liability and warranty ar-
rangements for the open source li-
cences displayed in this location only
apply in relation to the respective rights
holders.
85
Advertisement
Table of Contents
