12.37
Checking the frame
12.38
Checking the link fork
12.39
Checking the throttle cable routing
SERVICE WORK ON THE CHASSIS 12
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Remaining nuts,
chassis
H03711-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
»
If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
S01339-01
–
Check the link fork for damage, cracking, and deformation.
»
If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
S01340-01
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the fuel tank.
M6
M6
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
p. 73)
p. 72)
p. 77)
(
p. 78)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 59)
87