Closing 2-Stroke Oil Tank Cap; Cold Start Button - Husqvarna TE 250i 2022 User Manual

6.19

Closing 2-stroke oil tank cap

6.20

Cold start button

–
Put the 2-stroke oil tank cap on and turn it clockwise.
–
1
Fold loop
The 2-stroke oil tank cap engages.
V01648-10
The cold start button
body.
If the engine is cold and the ambient temperature is low, the
electronic fuel injection system extends the injection time. To
help the engine burn the increased fuel quantity, it must be sup-
plied with additional oxygen by pulling the cold start button.
Info
If the engine is warm, the cold start button must be deac-
tivated.
Possible states
The cold start button is activated – The cold start button is
•
pulled out all the way and turned by a ¼ turn.
The cold start button is deactivated – A further ¼ turn
•
returns the cold start button back to the basic position.
S03529-10
down.
1
is fitted on the side of the throttle valve
CONTROLS 6
25