(All TE standard models)
–
Position chain adjuster
tighten it yet.
–
Make sure that chain adjusters
adjusting screws
–
Check the chain tension. (
–
Tighten nut
Guideline
Nut, rear wheel
spindle
Info
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary
ratios with the same chain length.
Chain adjusters
–
Operate the foot brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
S04835-11
pressure point.
(All TE special models)
–
Position chain adjuster
tighten it yet.
–
Make sure that chain adjusters
adjusting screws
–
Check the chain tension. (
–
Tighten nut
Guideline
Nut, rear wheel
spindle
Info
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary
ratios with the same chain length.
Chain adjusters
–
Operate the foot brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
S04987-10
pressure point.
Finishing work
–
Remove the motorcycle from the lift stand. (
WHEELS, TIRES 14
3
4
. Mount nut
3
are fitted correctly on
5
.
p. 82)
4
.
M20x1.5
80 Nm (59 lbf ft)
3
can be turned by 180°.
3
4
. Mount nut
3
are fitted correctly on
5
.
p. 82)
4
.
M20x1.5
80 Nm (59 lbf ft)
3
can be turned by 180°.
, but do not
, but do not
p. 59)
115