Removing The Main Silencer; Installing The Main Silencer; Changing The Glass Fiber Yarn Filling Of The Main Silencer - Husqvarna TE 250i 2022 User Manual

12 SERVICE WORK ON THE CHASSIS
12.25
12.26
12.27
76
F02314-10

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
F02315-10

Installing the main silencer

F02316-10

Changing the glass fiber yarn filling of the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
–
Insert air filter and position retaining pin
The air filter is correctly positioned.
–
3
Insert retaining tab .
2
Retaining pin is secured with retaining tab
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
Finishing work
–
Install the air filter box cover. (
–
1
Remove screws with the washers.
–
Pull off the main silencer with exhaust sleeve
spring ring from the manifold.
–
Mount the main silencer with rubber sleeve
spring rings.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
1
in bushing
3
p. 74)
2
and the
1
and the
2
with the washers.
M6 10 Nm (7.4 lbf ft)
B
.
.