Husqvarna TE 250i 2022 User Manual page 139

–
Unplug connector
–
Remove coolant temperature sensor
until the coolant escapes without bubbles.
–
Mount and tighten the coolant temperature sensor
O-ring.
Guideline
Screw, cylinder head
temperature sensor
S04264-10
–
Plug in connector
–
Mount protection cap
–
Mount radiator cap
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
S04265-10
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
–
Check the coolant level. (
Finishing work
–
Install the engine guard. (
COOLING SYSTEM 16
4
.
5
with O-ring and wait
M10x1.25 12 Nm (8.9 lbf ft)
4
.
3
.
2
.
p. 133)
p. 93)
5
with
137