Adjusting The Idle Speed; Programming Ambient Air Pressure - Husqvarna TE 250i 2022 User Manual

17.4

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
17.5

Programming ambient air pressure

Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Info
If the vehicle is ridden with the engine running at various heights above sea level, the ambient pressure
is programmed on an ongoing basis.
If the vehicle is transported over great height differences, the ambient pressure must be reprogrammed.
–
Run the engine until warm.
The cold start button is deactivated – A further ¼ turn
returns the cold start button back to the basic position.
( p. 25)
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Adjust the idle speed by turning idle speed adjusting
1
screw .
Guideline
Idle speed
S03529-11
Tachometer (45129075000)
Info
Turn clockwise to decrease the idle speed.
Turn counterclockwise to increase the idle speed.
Make the setting in small steps.
An incorrect idle speed can have a negative impact on
overall engine running.
TUNING THE ENGINE 17
1,400 ... 1,500 rpm
141