Changing The Hydraulic Clutch Fluid - Husqvarna TE 250i 2022 User Manual

12.43

Changing the hydraulic clutch fluid

Warning
Skin irritation Brake fluid causes skin irritation.
–
Keep brake fluid out of the reach of children.
–
Wear suitable protective clothing and safety glasses.
–
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
–
Consult a doctor immediately if brake fluid has been swallowed.
–
Rinse the affected area with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
–
If brake fluid spills on to your clothing, change the clothing.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and clutch lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
Only use clean brake fluid from a sealed container.
SERVICE WORK ON THE CHASSIS 12
(All TE standard models)
–
Move the hydraulic clutch fluid reservoir mounted on the
handlebar into a horizontal position.
–
Remove screws
–
Take off cover
S04454-10
(All TE special models)
–
Move the hydraulic clutch fluid reservoir mounted on the
handlebar into a horizontal position.
–
Remove screws
–
Take off cover
S04974-10
1
.
2 3
with membrane .
1
.
2 3
with membrane .
91