Time:
NTP Server I/NTP
Server II:
Configuration Management
In this section, you can backup, restore, reset or reboot your CAP.
Backup:
Restore:
Factory Restore:
Reboot:
Firmware Upgrade
Please log in
http://www.tp-link.com/
locate and select the firmware file. Click Upload to upload the file to upgrade.
Specify the device's time. Select the number from the drop-down
list in time format HH/MM/SS.
Please input the primary NTP sever address and an alternative NTP
server address.
Figure 6-6 Configuration Management
Click Backup to save a copy of your current settings. Please save
your copy in a secure file location. It is recommended to back up the
settings before you change the configurations and upgrade the
firmware.
Click Browse to locate and select the backup file, then click Upload
to import the file to recover the configurations.
Click Reset to restore your device to its factory default settings.
Click Reboot to reboot your device. Do NOT power off your device
while it is rebooting.
to download the latest system file. Click Browse to
Figure 6-7 Firmware Upgrade
27