TP-Link TL-WA901ND User Manual page 41

Chapter 4
•
•
•
Note:
• If you do not set the key, the wireless security function is still disabled even if you have selected Shared
Key as Authentication Type.
• You will be reminded to reboot the device after clicking the
WDS Repeater
• Disable Security
the wireless stations will be able to connect this device without encryption. It is
strongly recommended that you choose one of the security types to enable security.
Downloaded from ManualsNet.com
WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format
stands for any combination of keyboard characters in the specified length.
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f,
A-F) in the specified length.
WEP Key - Select which of the four keys will be used and enter the matching
WEP key information for your network in the selected key radio button. These
values must be identical on all wireless stations in your network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
• For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 5 ASCII characters.
• For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 13 ASCII characters.
• For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F,
zero key is not permitted) or 16 ASCII characters.
- Check this box radio button to disable wireless security. If disabled,
search engine
Configure the Access Point
Save button.
38