TP-Link TL-WA901ND User Manual page 39

450mbps/300mbps wireless n access point
Hide thumbs Also See for TL-WA901ND:
Table of Contents

Advertisement

Chapter 4
• WPA/WPA2-Enterprise
• Group Key Update Period
value can be either 0 or at least 30. Enter 0 to disable the update.
Note:
You will be reminded to reboot the device after clicking the
Downloaded from
ManualsNet.com
• Automatic (Recommended)
the wireless station's capability and request.
• WPA-PSK
- Pre-shared key of WPA.
• WPA2-PSK
- Pre-shared key of WPA2.
Encryption
- You can select either Automatic(Recommended), TKIP or AES.
Wireless password
- You can enter ASCII or Hexadecimal characters. For
Hexadecimal, the length should be between 8 and 64 characters; for ASCII, the
length should be between 8 and 63 characters.
Group Key Update Period
The value can be either 0 or at least 30. Enter 0 to disable the update.
- Select WPA/WPA2 based on Radius Server.
Version
- You can select one of following versions.
• Automatic
- Select WPA or WPA2 automatically based on the wireless station's capability and
request.
• WPA
- Wi-Fi Protected Access.
• WPA2
- WPA version 2.
Encryption
- You can select either Automatic, TKIP or AES.
Radius Server IP
- Enter the IP address of the Radius Server.
Radius Port
- Enter the port used by radius service.
Radius password
- Enter the password for the Radius Server.
- Specify the group key update interval in seconds. The
search engine
- Select WPA-Personal or WPA2-Personal automatically based on
- Specify the group key update interval in seconds.
Save
button.
Configure the Access Point
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-wa801nd

Table of Contents