TP-Link TL-WA901ND User Manual page 8

Chapter 1 Get to Know About Your Access Point
Ports or Buttons Description
One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or
ETHERNET
a router.
If your client devices, such as wireless adapters, support Wi-Fi Protected Setup, then
you can press this button to quickly establish a connection between the access point
WPS
and the client devices and automatically configure wireless security for your wireless
network.
RESET Press and hold this button until all the LEDs turn on momentarily.
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
Antennas
performance.
5
Downloaded from ManualsNet.com search engine