Returning Data Projector Wireless Settings To Their Initial Defaults - Casio XJ-S35 Function Manual

Returning Data Projector Wireless Settings to Their Initial
Defaults
You can return all Data Projector Wireless function settings to their initial defaults by
executing "Initialize Wireless Setup". The following are the Wireless initial default settings
configured by this operation.
Dialog Box Item
Connection Keyword (page 72)
Show User Name Display (page 95)
Web Setup (page 67)
To return Data Projector Wireless function settings to their initial defaults
1
While Wireless is shown in the projection area, press the [MENU] key on the
Data Projector's remote controller.
This will display the setup menu.
2
Press the [ ] key to move the highlighting to "USB" and then press the
[ENTER] key.
3
Press the [ ] key once to move the highlighting to "Setup" and then press the
[ENTER] key.
This will display the Wireless setup menu.
4
Press the [ ] key to move the highlighting to "Initialize Wireless Setup".
Initial Default
Off (no keyword)
On
Enable
84