Casio XJ-S35 Function Manual page 58

3
To use the Manual Connection profile to establish a wireless LAN
connection between the first computer and the Data Projector
Note
Perform the following steps while the connection profile dialog box is on the display at
the end of the procedure under "
(page 56).
1
Use the Simple Connection profile to establish a wireless LAN connection
between the first computer and the Data Projector.
"
See Establishing a Wireless LAN Connection with a Single Computer Using a Simple
Connection " on page 53 for more information.
If a Simple Connection is already established between the first computer and the Data
Projector, proceed to step 2.
2
On the Wireless Connection window of the first computer, select "Switch
Connection Profile" on the "Connection" menu.
This will display a dialog box for switching the connection profile.
3
Click the "Profile Name" down arrow button and then select "Test" from the
menu that appears.
4
Click the [Send Settings] button.
This will display a dialog box for sending the setup.
5
Select "Manual Connection 1" for "Send Destination", and then click the [OK]
button.
This will display a dialog box prompting you to enter the current password.
Enter the password that you use when logging in to Web Setup (page 65). The initial
default password is "casio".
6
Enter the password and then click the [OK] button.
2
To create connection profiles for the computers"
58