Configuring Viewer Setup Menu Settings - Casio XJ-S35 Function Manual

Configuring Viewer Setup Menu Settings

You can use the Viewer Setup Menu to configure viewer display settings and to perform a
presentation using playback settings that are different from those that were stored with
presentation data using EZ-Converter.
Note
When you perform a slideshow by running a presentation file created with EZ-
Converter, the slideshow settings on the Viewer setup menu (Image Switching,
Slideshow Display Interval, Slideshow Transition Effect, and Slideshow Repeat) are
changed automatically to the playback settings (
you are running.
In order to modify slideshow settings for which "Auto" was selected for the
presentation file's "Image Switching" setting when the file was created with EZ-
Converter, you need to pause the slideshow, open the menu, and then change the
settings as required.
To configure Viewer setup menu settings
1
Press the [MENU] key to display the setup menu.
2
Press the [ ] key to move the highlighting to "USB" and then press the
[ENTER] key.
3
Press the [ ] key once to move the highlighting to "Setup" and then press the
[ENTER] key.
This will display the Viewer setup menu.
4
Use [ ] and [ ] to select the menu item whose setting you want to change.
page 23) saved in the presentation file
42