Establishing A Wireless Lan Connection With A Single Computer Using A Simple Connection - Casio XJ-S35 Function Manual

Establishing a Wireless LAN Connection with a Single
Computer Using a Simple Connection
To establish a wireless LAN connection between a single computer and the
Data Projector
Note
The following explains the simplest type of connection. It shows how to use the Data
Projector's built-in connection profile named "Simple Connection 1" to establish a
wireless LAN connection with a single computer.
1
Turn on the Data Projector.
Wait until the Data Projector's POWER/STANDBY indicator is lit green.
2
Connect the CASIO YW-2 wireless adapter to the Data Projector's USB port.
You could also turn on the Data Projector with the wireless adapter already connected to
the USB port.
The Data Projector will detect the wireless adapter and start up its Wireless function
automatically. The message shown below will appear in the projection area.
3
Turn on your computer and start up Windows.
4
If your computer is already connected to a network, disable the connection.
On the Windows Control Panel, click "Network Connections" ("Network and Dial-up
Connection" in the case of Windows 2000). If "Local Area Connection", "Wireless Network
Connection" or "Network Bridge" is displayed on the window that appears, right-click the
icon and then click "Disable" on the dialog box that appears.
Check to make sure that "Simple Connection 1"
is shown.
53