Casio XJ-S35 Function Manual page 105

To restore all settings on the YC Camera application setup menu to their
initial factory defaults
1
Press the [MENU] key to display the setup menu.
2
Press the [ ] key to move the highlighting to "USB" and then press the
[ENTER] key.
3
Press the [ ] key once to move the highlighting to "Setup" and then press the
[ENTER] key.
This will display the YC Camera application setup menu.
4
Press the [ ] key to move the highlighting to "Initialize YC Camera Setup" and
then press the [ENTER] key.
This displays the dialog box shown below.
5
Use the [ ] key to select "Yes".
6
To restore all the settings to their initial defaults, press the [ENTER] key.
To exit the operation without doing anything, press [ESC] instead of [ENTER].
7
After you are finished, press the [ESC] key to exit the setup menu.
105