Casio XJ-SK600 Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Projector
  5. XJ-SK600
  6. Manual
Casio XJ-SK600 Manual

Casio XJ-SK600 Manual

Dual projection system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dual Projection System
Dual Projection System
XJ-SK600
XJ-SK600
http://world.casio.com/manual/projector/
MA1303-A
Be sure to read the precautions in the "YA-S10 Setup Guide" that comes with the
English
Dual Projection System.
Be sure to keep all user documentation handy for future reference.
Setup Guide
To obtain the latest version of this manual visit the website at the URL to the left.
Lesen Sie unbedingt die wichtigen Hinweise und Vorsichtsmaßregeln in der zum
Deutsch
Dualprojektionssystem mitgelieferten „YA-S10 Setup-Anleitung".
Bitte bewahren Sie die gesamte Benutzerdokumentation für späteres
Nachschlagen auf.
Setup-Anleitung
Für die neueste Ausgabe dieser Bedienungsanleitung besuchen Sie bitte unsere
Website unter der links angegebenen URL.
Veuillez lire les précautions dans le « Guide d'installation de la YA-S10 » fourni
Français
avec le Système de projection double.
Conservez la documentation à portée de main pour toute référence future.
Guide d'installation
Pour obtenir la toute dernière version de ce manuel, consultez le site à l'adresse
indiquée à gauche.
Asegúrese de leer las precauciones en la "Guía de configuración de YA-S10"
Español
suministrada con el Sistema de proyección dual.
Asegúrese de tener a mano toda la documentación del usuario para futuras
consultas.
Guía de configuración
Para obtener la versión más reciente de este manual, visite nuestro sitio web en la
URL a la izquierda.
Assicurarsi di leggere le avvertenze riportate nella "Guida di setup di YA-S10"
Italiano
fornita in dotazione con il Sistema di proiezione duplice.
Conservare l'intera documentazione dell'utente a portata di mano per riferimenti
futuri.
Guida di setup
Per ottenere la versione più aggiornata di questo manuale, visitare il sito web
all'URL riportato alla sinistra.
Se noga till att läsa säkerhetsföreskrifterna i "YA-S10 Installationshandbok" som
Svenska
medföljer projektorn för dubbelprojektion.
Förvara all användardokumentation nära till hands för framtida referens.
Installationshandbok
Den senaste versionen av denna installationshandbok kan hämtas från
webbplatsen med den URL-adress som anges till vänster.
Certifique-se de ler as precauções no "Guia de Configuração da YA-S10" que vem
Português
com o Sistema de Projeção Dual.
Certifique-se de guardar toda a documentação do usuário à mão para futuras
Guia de Configuração
referências.
Para obter a última versão deste manual, visite o site no endereço URL à esquerda.
U moet de voorzorgen lezen in de "YA-S10 Instelgids" die wordt meegeleverd met
Nederlands
het Tweevoudig projectiesysteem.
Bewaar alle documentatie op een veilige plaats voor latere naslag.
Instelgids
Bezoek de hier links vermelde website om de nieuwste versie van de handleiding
te verkrijgen.
Lue kaksoisprojisointijärjestelmän mukana toimitetun YA-S10-laitteen
Suomi
Asetusoppaan varoitukset.
Muista pitää kaikki käyttöä koskevat asiakirjat lähettyvillä tulevaa tarvetta varten.
Asetusopas
Saat uusimman version tästä oppaasta vasemmalla olevasta Internet-osoitteesta.
Pass på å lese forholdsreglene i "Oppsettguide YA-S10" som følger med det doble
Norsk
projeksjonssystemet.
Pass på å oppbevare all brukerdokumentasjon lett tilgjenglig for fremtidig bruk.
Oppsettguide
For å få den nyeste utgaven av denne bruksanvisningen, besøk nettsiden ved bruk
av URL-en til venstre.
CkJEGFSISwRPoTrDPlFiCzNrChK

Advertisement

Table of Contents
loading

Related Manuals for Casio XJ-SK600

Summary of Contents for Casio XJ-SK600

  • Page 1 CkJEGFSISwRPoTrDPlFiCzNrChK Dual Projection System Dual Projection System XJ-SK600 XJ-SK600 Be sure to read the precautions in the “YA-S10 Setup Guide” that comes with the English Dual Projection System. Be sure to keep all user documentation handy for future reference. Setup Guide To obtain the latest version of this manual visit the website at the URL to the left.

  • Page 2: Table Of Contents

    CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data caused by malfunction or maintenance of this product, or due to any other reason.
  • Page 3 *1 The Control Box and two projectors are installed in the cabinet at the factory. *2 Some XJ-SK600 models do not come with a CD-ROM. If your projector does not come with a CD-ROM, download the User’s Guide from the CASIO projector website. See “User...

  • Page 4: Xj-Sk600 Overview

    XJ-SK600 Overview General Guide Projectors Control Box Cabinet Zoom ring Smaller Larger Focus ring...

  • Page 5: Getting Ready

    Getting Ready Installation Location The Projector System can be placed on a flat surface or it can be ceiling mounted. Placing the Projector System on a Flat Surface When placing the Projector System on a flat surface, you need to install the four feet on the bottom of the cabinet.
  • Page 6 Getting Ready Location Precautions Use a conveniently located power outlet that you can reach easily when you need to unplug the power cord. Make sure there is nothing inside the area (within 30 cm Projector 30cm (11.8") (11.8 inches) of the Projector System) indicated by the nearby illustration.

  • Page 7: Ceiling Installation

    Getting Ready Ceiling Installation The Projector System can be hung from a ceiling. The Projector System can be ceiling mounted in an inverse (upside down) configuration or a vertical configuration. Important! Important! Important! To protect against sudden accidental dropping of the Projector System from a ceiling mount configuration, be sure to secure the cabinet to ceiling fixtures with wires or some other adequate means.

  • Page 8: Wiring

    Getting Ready Wiring Wire the Control Box and two projectors inside the Cabinet as shown in the illustration below. Projector A (Side nearest the Control Box) Ferrite core Control Box side Use the supplied Use a supplied RS-232C power cord to plug cable to connect.

  • Page 9: Preparing The Remote Controllers

    Getting Ready Preparing the Remote Controllers Load two AAA-size alkaline batteries into each of the remote controllers: one YT-200 Control Box remote controller, one YT-120 projector remote controller. Batteries are provided with the Projector System. To load batteries: Open the battery cover on the back of a remote controller. Load the batteries making sure their poles (+/–) are facing in the correct directions.
  • Page 10 Getting Ready On the remote controller, press the [MENU] key to display the setup menu, and then configure the settings below in the indicated sequence. Setting Item Setting (1) Option Settings 1 3 Auto Keystone Correction (2) Screen Settings 3 Keystone Correction (3) Screen Settings 3 No Signal Screen Black (4) Input Settings 3 Signal Name Indicator...

  • Page 11: Configuring Initial Control Box Settings

    Getting Ready Configuring Initial Control Box Settings After you finish configuring the initial settings of the two projectors, perform the procedure below to configure initial Control Box settings. Perform the operations below using the Control Box remote controller (YT-200). Note that these operations cannot be performed using the projector remote controller (YT-120).

  • Page 12: Adjusting The Positions Of The Two Projectors

    Getting Ready Adjusting the Positions of the Two Projectors Use the procedure in this section to adjust the projected images of the two projectors so they are approximately the same size and at the same position on the target screen (the screen, wall, or other surface to be used as the projection surface after setup of the Projector System is complete).
  • Page 13 Getting Ready Perform the steps below to adjust the position and size of the Projector B image so it slightly runs off the edges of the target screen, as shown in the “After adjustment” image above. (1) Adjust the zoom ring of Projector B. (2) Loosen the five screws that secure the cabinet side panels, and then rotate the adjuster knob to adjust the orientation.
  • Page 14 Getting Ready On the “Image Shaping” menu that appears, select “Adjust Image Position” and then press the [ENTER] key. This will project two adjustment patterns, a yellow one for Projector A and a light blue one for Projector B. Use the focus rings of Projector A and Projector B to adjust the focus of the patterns as required. Important! Important! Important!
  • Page 15 Getting Ready Next, perform the procedure in the separate YA-S10 Setup Guide under “Shaping the Image to Match the Projection Screen”. Important! Important! Important! During the adjustment procedures from this point onwards, do not alter the cabinet position or positions of the projectors inside the cabinet, the zoom ring setting, the focus ring setting, or the screen position.

  • Page 16: Product Specifications

    Product Specifications Model Name XJ-SK600 Brightness Approximately 6000 lumens Environment Operating temperature: 5 to 35°C Operating humidity: 20 to 80% (non-condensation) Operating altitude: 0 to 2,000 meters above sea level Power Requirements Projector: 100VAC - 240VAC, 50/60Hz Control Box: AC adapter (100VAC - 240VAC, 50/60Hz)

  • Page 17: Fcc Warning

    Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits. Declaration of Conformity Model Number: XJ-SK600 Trade Name: CASIO COMPUTER CO., LTD. Responsible party: CASIO AMERICA, INC. Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801 Telephone number: 973-361-5400...
  • Page 18 Batterij niet weggooien, maar inlevern als KCA Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: CASIO EUROPE GmbH Casio-Platz 1, 22848 Norderstedt, Germany...
  • Page 19 Printed in China Imprimé en Chine MA1303-A RJA528115-001...

Table of Contents