Establishing A Wireless Lan Connection After Configuring Security Settings; To Establish A Wireless Lan Connection Between The Projector And A Computer After Configuring Security Settings - Casio XJ-A246 Function Manual

Establishing a Wireless LAN Connection after
Configuring Security Settings
The procedures in this section start from the point that a single projector is projecting the Wireless
standby screen following configuration of security settings. They also assume that the computer was
restarted after settings were configured.
To establish a wireless LAN connection between the projector
and a computer after configuring security settings
1.
On the computer, start up Wireless Connection 3.
The Wireless Connection 3 window will appear with the message "Connecting".
A dialog box like the one shown below as soon as Wireless Connection 3 finds the projector to
connect to.
2.
In the "Passphrase/WEP Key" and "Confirm" input boxes, enter the passphrase
(or WEP key) registered on the projector.
Enter the character string you input in step 5 under "To configure security settings" (page 21).
3.
When everything is the way you want, click [OK].
This establishes a wireless LAN connection between the projector and computer, and causes
the computer screen contents to be projected from the projector.
For details about subsequent Wireless Connection 3 projection operations and other
information, see "Wireless LAN Connection Operations" (page 25).
23