Replacing The License Plate Light Bulb - Yamaha XMAX CZD300M 2021 Owner's Manual

Periodic maintenance and adjustment
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
Replacing the license plate
light bulb
1. Remove the license plate light unit
1
1. License plate light unit
2. Bolt
3. License plate light bulb socket
4. Plate
2. Remove the burnt-out bulb by
1. License plate light bulb
3. Insert a new bulb into the socket.
4. Install the socket (together with
8-34
by removing the bolts and plate,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
4
pulling it out.
the bulb) by pushing it in, and then
install the license plate light unit by
installing the plate and bolts.
EAU78560
3
1
2
8
1