Yamaha XMAX CZD300M 2021 Owner's Manual page 38

Instrument and control functions
TIP
 If the engine turns over slowly
when using the start switch, have
a Yamaha dealer charge the bat-
tery.
 If "---" appears in the battery volt-
age display, have a Yamaha deal-
er check the battery.
Traction control system display
5
1. Traction control system display
This display shows the current status
of the traction control system. (See
page 5-15.)
 "TCS ON": the system is on
 "TCSOFF": the system is off
TIP
If only "TCS" is displayed, there is a
communication error within the vehi-
cle. Have a Yamaha dealer check the
vehicle as soon as possible.
Average fuel consumption display
1. Average fuel consumption display
This function calculates the average
1
fuel consumption since it was last re-
set.
The average fuel consumption can be
displayed
tion/Average_ _._ km/L", "Consump-
tion/Average_
"Consumption/Average_ _ _._ MPG".
 "Consumption/Average_
km/L": The average distance that
can be traveled on 1.0 L of fuel is
shown.
 "Consumption/Average_
L/100 km": The average amount
of fuel necessary to travel 100 km
is shown.
 "Consumption/Average_
MPG": The average distance that
can be traveled on 1.0 US.gal of
fuel is shown.
To reset the average fuel consumption,
push the "INFO" switch for at least
three seconds.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until
the vehicle has traveled 1 km (0.6 mi).
5-9
as either "Consump-
_._ L/100 km"
1
or
_._
_._
_ _._