Yamaha XMAX CZD300M 2021 Owner's Manual page 41

ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Stop/Run/Start switch "
To crank the engine with the starter,
set this switch to "
the switch down towards " ". See
page 7-2 for starting instructions prior
to starting the engine.
Set this switch to "
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
Hazard switch " "
With the main switch in the "ON" posi-
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
"TRIP/INFO" switch
This switch is used to make setting and
display changes in the multi-function
meter unit. See page 5-3 for more in-
formation.
Instrument and control functions
EAU12501
EAU54212
/ / "
", and then push
" to stop the en-
EAU79500
ECA10062
EAU78491
5-12
To use the "TRIP" switch, move the
"TRIP/INFO" switch in direction (a). To
use the "INFO" switch, move the
"TRIP/INFO" switch in direction (b).
1
1. "TRIP/INFO" switch
(a) (b)
5