Yamaha XMAX CZD300M 2021 Owner's Manual page 35

Table of Contents

Advertisement

 The tripmeter will reset and conti-
nue counting after 9999.9 is
reached.
Time tripmeter "Time"
1. Time tripmeter
The time tripmeter displays the time
that has elapsed while the main switch
was in the "ON" position since it was
last reset.
The maximum time that can be shown
is 99:59.
TIP
To reset the time tripmeter, select it by
pushing the "TRIP" switch, and then
push the "TRIP" switch for three sec-
onds.
Fuel reserve tripmeter "F Trip"
1. Fuel reserve tripmeter
Instrument and control functions
When approximately 2.4 L (0.63 US
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
will automatically change to the fuel re-
serve tripmeter "F Trip" and start
counting the distance traveled from
that point. In this case, push the "TRIP"
switch to switch the display in the fol-
lowing order:
F Trip → Oil Trip → V-Belt Trip → Odo
→ Trip → Trip Time → F Trip
1
To reset the fuel reserve tripmeter, se-
lect it by pushing the "TRIP" switch,
and then push the "TRIP" switch for
three seconds.
The fuel reserve tripmeter will reset au-
tomatically and disappear after refuel-
ing and traveling 5 km (3 mi).
Oil change tripmeter "Oil Trip"
1. Oil change indicator "Oil"
2. Oil change tripmeter
The oil change tripmeter shows the
distance traveled since the oil was last
changed.
1
The oil change indicator "OIL" flashes
at the initial 1000 km (600 mi), then at
4000 km (2400 mi) and every 5000 km
(3000 mi) thereafter to indicate that the
engine oil should be changed.
5-6
1
5
2

Advertisement

Table of Contents
loading

Table of Contents