Table of Contents
Advertisement
Packaging for Shipment, Cont'd
3.
With the platform extended approximately 1" (2.5 cm),
insert the yellow shipping restraints through the slotted
holes in one side of the enclosure's shroud (figure B-8) and
out the holes in the opposite side. Use the included tie-
wraps to secure the shipping restraints in place.
HSA 822MS
Enclosure
Yellow Shipping
Restraint
REPLACE
Figure B-8 — Installing the shipping restraints
4.
Insert the HSA 822MS into one of the foam shells
(figure B-9). Either open end of the open top panel fits into
the recesses in the foam.
Figure B-9 — Installing the foam shell
B-8
HSA 822MS • Packaging for Shipment
5.
Insert the opposite end of the HSA 822MS into the
remaining foam shell (figure B-10). Firmly push the foam
shells together as far as they will go to completely suspend
the HSA.
Figure B-10 — HSA suspended in the foam
HSA 822MS • Packaging for Shipment
B-9
Advertisement
Table of Contents
