Dell PowerScale OneFS Reference Manual page 84

400100009
One or more nodes have been excluded from participating in this job.
Description
The job engine was configured to exclude one or more nodes from participating in this job.
Administrator action
This message is informational. No action is required.
400100010
One or more nodes that do not exist have been excluded from participating in this job.
Description
The job engine was configured to exclude nodes from this job, but one or more does not exist.
Administrator action
Examine job engine configuration and ensure that excluded nodes are configured properly
400100011
The cluster must be restriped, but FlexProtect is not running.
Description
The cluster contains one or more failed devices, and a FlexProtect operation needs to be run. FlexProtect will start automatically
in the case of drive failures; however, in the case of node failures, FlexProtect requires user intervention in order to start.
Administrator action
Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see Gathering cluster logs.
400110001
The system is running low on memory, and the specified process was stopped to free memory.
Administrator action
1. Identify any new workflows or determine whether an increased number of clients are accessing the cluster. Make sure that
the load is spread equally across all nodes through SmartConnect or an external load balancer.
2. If any changes have been made to the HTTPD configuration to increase the supported number of connections, revert those
changes.
84 Software events