Dell PowerScale OneFS Reference Manual page 111

1100000004
An Amazon S3 telemetry reporting bucket was not found.
Description
CloudPools attempted to access usage reports from an Amazon S3 cloud provider. The S3 telemetry reporting bucket, where
usage reports are stored, could not be found.
Administrator action
Perform the following steps in the order listed. If the issue resolves after a step, there is no need to complete the subsequent
steps.
● Confirm that the specified bucket was not deleted from the cloud. If the bucket was deleted, determine if the bucket was
deleted in error or if a security breach allowed direct access to the cloud provider account.
● Confirm that the URL of the cloud provider has not changed.
If the event persists, gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to
gather cluster logs, see Gathering cluster
1100000005
A Cloudpool capacity threshold was exceeded.
Descriptions
By default, this event first appears when the amount of data on the cloud provider reaches 70%. The event will notify you when
the following capacity thresholds are exceeded:
70%
80%
90%
95%
Administrator action
Reduce the amount of data stored on your cloud provider.
If the event persists, gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to
gather cluster logs, see Gathering cluster
1100000006
CloudPools data is corrupted.
Description
The MD5 hash does not match. Data retrieved from the cloud provider is corrupted.
logs.
Informational
Warning
Critical
Emergency
logs.
Software events 111