Important Safety Instructions - Concept2 KF1310 Manual

ACKNOWLEDGMENT
s Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service
life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place
for future reference. Make sure other people using the product are familiar with these instructions.
Voltage
Input
Acoustic power output level

IMPORTANT SAFETY INSTRUCTIONS

t
a
• Use the unit only as described in this operating manual.
,
s
• Remove all the packaging and marketing materials from the unit before
the first use.
• Make sure the mains voltage corresponds to the values on the rating
plate.
• For further protection, it is recommended to install a current protector
(RCD) with the actuating current not exceeding 30 mA in the power
circuit of the bathroom. Please consult an electrician.
• The unit reaches high temperatures during operation and remains hot
for some time after being turned off. Do not touch the hot surfaces. Use
the handles and buttons. There is a risk of being burned.
• The unit may not be cleaned, stored, or covered until it has cooled down
completely.
• Do not leave the unit unattended while it is turned on or even only
plugged into the wall outlet.
• If you need to lay the unit aside during use, always switch it off and lay it
on a fireproof surface.
• Before plugging in or unplugging the unit from the wall outlet, make
sure the switch is OFF.
• When disconnecting the unit from the wall outlet, never pull the power
cord. Grasp the plug and disconnect it by pulling.
• Do not allow children or unskilled people to handle the unit. Use the unit
out of the reach of these individuals.
0 KF1310
Technical parameters
220 - 240 V
400 W
78 dB
EN
33