Table of Contents
Advertisement
Service setup
9 Service setup
In service setup it is able to set limits, to change operating hours counters or load backup-
datas of the configuration settings. Manual, functional switching of all actors is possible.
The service setup is password protected and only available for trained service
technicians. Improper operation or incorrectly stored configuration settings may
lead to malfunction or damage to the device
9.1.1 Adjustment conductivity sensors Q and temperature T
Service setup is only available for service technicians
-
from membraPure GmbH
To enter the service setup please enter the monthly
-
generated password which is provided by
membraPure GmbH and confirm entry with "OK"
-
The service menu has three pages of sub-menus.
Touch the arrow-keys which are located at the
-
bottom of the screen to switch between the sub-
menus.
Press the button „Q-Setup"
-
Click the pull-down menu to choose the conductivity
-
sensor
Page 49
Advertisement
Table of Contents
