Cabling - BEC 6200WZL Series User Manual

4g/lte cellular broadband router

Hide thumbs Also See for 6200WZL Series:

Table of Contents

Product Overview

Cabling

One of the most common causes of problems is bad cabling. Make sure that all connected devices are

turned on. On the front panel of the product is a bank of LEDs. Verify that the LAN Link and LEDs are

lit. If they are not, verify that you are using the proper cables.

Make sure that all other devices (e.g. telephones, fax machines, analogue modems) connected to the

same telephone line as your BEC router have a line filter connected between them and the wall socket

(unless you are using a Central Splitter or Central Filter installed by a qualified and licensed

electrician), and that all line filters are correctly installed in a right way. If the line filter is not correctly

installed and connected, it may cause problems to your connection or may result in frequent

disconnections.

BEC 6200WZL User Manual

Table of Contents