Section 3 Installation; Required Tools; Required Documentation - Hologic QDR 4500 Technical Manual

REQUIRED TOOLS

When installing the QDR 4500, a tool kit that includes the following items is required:
•
Assortment of both flat-blade and Phillips screwdrivers
•
Assortment of needle-nose and diagonal cutting pliers
•
Socket drivers (full set including 1/4", 3/8", 7/16", 1/2" and 3/4")
•
Open-end wrenches (full set including 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4") and an
adjustable wrench
•
Hex driver (Allen wrench) set including sizes 1/16", 5/64", 3/32", 7/64", 1/8", 9/64",
5/32" 3/16", 7/32" and 1/4"
• Digital level, precise to ± 0.1 degree
•
Oscilloscope and digital multimeter
•
Survey meter (Victoreen model 450P or equivalent)
•
X-ray leakage test tool, #099-0566
•
Measuring tape, approx. 3.7 meters (12 feet)
•
Beam alignment tool (010-0923)

REQUIRED DOCUMENTATION

The following documents are required:
•
QDR 4500 User's Guide
•
Computer manual
•
Printer manual
•
DOS Operating System manual (for DOS systems)
•
Introducing Microsoft Windows
•
Optical Disk Drive manual (when installed)
•
The Radiation Measurement Report (CSD-0026-01)
SECTION 3
INSTALLATION

95 (for Windows 95 systems)
3-1