Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Siemens Gigaset S790 Manual

Gigaset S790/S795 / USA-CAN EN / A31008-M2121-R301-1-3S19 / starting.fm / 28.07.2009

Activating/deactivating the handset

Activating/deactivating the keypad lock

Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤
Press and hold the end call key a.
or:
¤
Do not press any key: after 2 minutes the display will automatically revert
to idle status.
Settings that have not been saved by selecting the display keys
or are lost.
§Change§
An example of the display in idle status is shown on page 16.
a
With the phone in idle status, press and hold the end call key (con-
firmation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Please note
When the handset is switched on, an animation showing the Gigaset logo
displays for several seconds.
The keypad lock prevents any
#
Press and hold the
the keypad lock. You will hear the confirmation tone.
If the keypad lock is activate, you will see a message when you press a key.
The keypad lock deactivates automatically when you receive a call. It is reacti-
vated when the call is finished.
Please note
When the keypad lock is active, you cannot call emergency numbers.
Emergency numbers cannot be dialed if the keypad lock is activated!
unauthorized or accidental
pound key in idle status to activate or deactivate
Using the phone
, ,
§OK§ §Yes§ §Save§
use of the phone.
23