Attaching The Belt Clip; Activating/Deactivating Handset; Activating/Deactivating Keypad Protection - Siemens Gigaset Classic 4015 Operating Instructions Manual

Hide thumbs Also See for Gigaset Classic 4015:

Table of Contents

Gigaset 4015 Classic, GBR, A31008-G4015-J101-1-7619

Preparing the telephone

Attaching the belt clip

Push the belt clip onto the back of the handset until the side protru-

sions click into place.

To activate/deactivate, hold down the end call key – You will hear the

confirmation

You can disable the handset keys when carrying the unit in your pocket

or bag. This protects the keypad against inadvertent activation.

If there is an incoming call, the key lock is automatically deactivated

and re-activated after the call has ended.

Accepting a call: Press the talk key

To activate/deactivate, hold down key – you will hear the confirma-

tion beep

* Confirmation beep = rising tone sequence,

Once the initial charging operation is completed you can

replace your handset into the base station after each call.

Charging is controlled electronically. This ensures optimum

charging and prolongs battery life.

The batteries heat up during charging. This is normal and not

dangerous.

The battery charging status is correctly displayed only after

uninterrupted charging/discharging. You should therefore

avoid opening the battery compartment unnecessarily.

beep*.

The handset is activated as soon as you insert the batteries and

place the handset in the base station.

Error beep = falling tone sequence.

vorberei.fm

14.09.01

Table of Contents