Toshiba B-FP3D-GH52-QM-R Owner's Manual page 13

Before using a peel-off unit
When issuing labels in the peel-off mode, pull out
the peel-off roller before loading a label roll.
1. Open the Top cover, and push the lock lever in
the direction of the arrow.
Lock lever
2. This wills pop-up the Peel-off Unit.
Refer to "Loading the Media" on the previous
page and set a label roll.
Peel-off Unit
NOTES:
1. DO NOT PULL the center of the Peel-off roller
hard. Doing so may break the Peel-off roller.
2. Do not forcibly pull out the Peel-off roller or push it
into the printer, otherwise the Peel-off roller may
break.
3. Use caution when working with the Tear bar. The
edge is sharp.
Peel-off unit
14
 How to put away the Peel-off Roller
1. Gently press the Peel-off Roller Unit down, and
push it into the printer in the direction indicated by
the arrow until it clicks.
Peel-off Unit
.
Peel-off Unit