Table of Contents
Advertisement
27. Enter to SIZE "R-SIZE" mode by pressing TV/VIDEO
28. Adjust so that the line on the border closes to the screen frame at
top, bottom, left and right (see figure)
29. Enter to PIN "R-PIN" mode by pressing TV/VIDEO
30. Adjust horizontally and vertically (see figure)
31. Enter to CORNER "R-CORNER" mode by pressing TV/VIDEO.
32. Adjust corners (see figure)
33. Enter to KEY "R-KEY" mode by pressing TV/VIDEO
34. Adjust KEY (see figure)
35. Display pattern of border and cross, then check that red overlaps
green pattern, if it is not satisfactory, repeat from step 19.
36. Enter to STATIC "B-STATIC" mode.
37. Press "1 or 3" key repeatedly on remote until only green and blue
pattern are displayed
38. Adjust B-STATIC so that the center of blue overlaps with the center
of green (see figure)
39. Perform all adjustments for blue (B-SKEW, B-LINEAR, B-SIZE, B-PIN,
B-CORNER, B-KEY)
40. Display border and cross pattern and confirm that blue overlaps with
green pattern, if it is not satisfactory, repeat for blue.
41. Press "1 or 3" key repeatedly on remote until green, red and blue
(white), confirm that red and blue overlaps with green pattern.
42. Press "7" key on remote, then ACTION to save changes.
43. Press POWER then ACTION to exit adjustments or press TV/VIDEO
for at least 3 seconds to change to Fine Adjustment Mode.
"B-STATIC" mode adjustment
63
Advertisement
Table of Contents
