horizontal line center match with the marks on screen frame, if linearity is not good enough, repeat
adjustments.
19. Enter to "STATIC" mode by pressing TV/VIDEO.
20. Press "1" or "3" repeatedly until green and red only are shown.
21. Adjust "R-STATIC" so that the center of red overlaps with the center
of green
22. Enter to SKEW "R-SKEW" mode by pressing TV/VIDEO
23. Adjust "R-SKEW" so that the vertical and horizontal line of center
overlaps with green (see figure)
24. Press "7" then "ACTION" key on remote to save changes
NOTE:
Remember always save data following each adjustment by pressing "7" key on remote, then ACTION.
25. Enter to LINEARITY "R-LINEAR" mode by pressing TV/VIDEO.
26. Adjust Horizontal linearity (see figure)
"STATIC" mode adjustment
"SKEW" mode adjustment
62