Table of Contents
Advertisement
6. Repeat steps for green only.
7. Set VIDEO "C_OFF" DAC from 00 to 03, and project only blue.
8. Repeat steps for blue only.
16.2.1. Focus - Optical lens adjustment
Optical adjustments
NOTE:
This adjustment normally should not require resetting unless the lens has been replaced or
adjustment has changed.
1. Optical focus adjustment is located on the top of each CRT lens
system. Loosen the adjustment knurled locking knob.
2. Turn the PTV ON. Apply and view a crosshatch with dots pattern.
3. Adjust each lens focus for best focus while viewing each CRT.
4. Cover the red and blue CRT, projecting green only. Rotate the green
lens for best focus around screen center area.
5. Do the same for the red focus lens while projecting red only.
6. Repeat for blue.
7. Align VM coils.
Optical lens focus adjustment
42
Advertisement
Table of Contents
