Table of Contents
Advertisement
8.1. Chassis assembly
The chassis assembly shown in figure includes all the electrical and optical (light box)
components
A-Board
1. A-Board is secured to the chassis tray with five screws.
2. The A-Board is mated to the D-Board by four flexible connectors
(male side of connectors): A1, A2, A3 & A4. To remove this board,
unplug the connectors on the A-Board pulling from the sides of
each connector.
NOTE:
Some tie wraps that secure the wire dressings may need to be unfastened for chassis removal.
Chassis front view
18
Advertisement
Table of Contents
