Table of Contents
Advertisement
Keyboard and front A/V inputs removal
1. Remove the speaker grille.
2. Unplug the connectors from the keyboard and front A/V inputs
assemblies. Remove the screws from the control panel and tilt the
front panel assembly upward and release it from the front cabinet.
Then remove the screws affixing the keyboardand front A/V inputs to
the control panel.
Speakers replacement
1. Remove the speaker grille.
2. Each speaker is secured to the cabinet with (4) screws.
3. Disconnect the R and L speaker lead connectors from the speaker
units.
Back lower cover removal
1. Remove (7) hex screws around the perimeter, marked with arrows.
See figure for screws location.
2. Remove (3) screws from around the A/V terminal board (marked with
arrows).
Back lower cabinet removal
27
Advertisement
Table of Contents
