Table of Contents
Advertisement
14. Disassembly for service
NOTE:
Board ground wires may have to be disconnected to disassemble some boards. All ground wires must
be reconnected using jumper leads, if necessary, before power is applied to PTV for service.
Speaker grille removal
Some models come with three pieces (sides for speakers and center cover); Speaker grille(s), it is
secured to the cabinet of the PTV or on the sides. Grip panel(s) from the sides and middle upper part
for one piece models, gently pull forward toremove. When reassembling, make certain to firmly press
on the panel where the insertion points (5) are located, one at each corner and one at the middle top
edge
Speaker grille removal (may vary)
26
Advertisement
Table of Contents
