Table of Contents
Advertisement
Adjusting the
Adjusting the Computer and DVD/DTV Images
2
AUTO SYNC
button
3
AUTO SYNC
button
Downloaded From projector-manual.com Sharp Manuals
Downloaded From projector-manual.com Sharp Manuals
-33
2,3,4
2, 3, 4
1, 5
1, 5
On-screen Display
On-screen Display
Auto S
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
• Used to automatically adjust a computer image.
occur between the DMD pixels, causing flickering,
• Select whether the image is to be synchronized
vertical stripes, or contrast irregularities in portions of
automatically when switching the signal with "ON" or
the screen. Should this occur, adjust "Clock", "Phase",
"OFF".
"H-Pos" and "V-Pos" for the optimum computer image.
OFF (
)
Description of Adjustment Items
• Synchronized adjustment is not automatically
performed.
Selected item
Description
• Press AUTO SYNC to perform manual adjustment.
Clock
Adjusts vertical noise.
ON (
)
Phase
Adjusts horizontal noise (similar to tracking on your VCR).
• Synchronized adjustment is automatically performed.
H-Pos
Centres the on-screen image by moving it to the left or right.
V-Pos
1 Press MENU. The "Picture" menu screen appears.
Centres the on-screen image by moving it up or down.
All computer image adjustment items are returned to the factory
Reset
preset settings.
2 Press
/
to display the "Fine Sync" menu
screen.
• "Clock", "Phase", "H-Pos" and "V-Pos" cannot be used in the
3 Press
/
to select "Auto Sync".
component mode.
• Computer image adjustments can be made easily by pressing
4 Press
/
to select "ON" or "OFF".
AUTO SYNC (
) on the remote control. See page 35 for details.
5 To exit the menu screen, press MENU.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Fine Sync" menu
• When the optimum image cannot be achieved with Auto
screen.
Sync adjustment, use manual adjustments. (See page 33.)
• The Auto Sync adjustment may take some time to complete,
3 Press
depending on the image of the computer connected to the
/
to select a specific adjustment item.
projector.
4 Press
/
to move the
adjustment item to the desired setting.
5 To exit the menu screen, press MENU.
• To reset all adjustment items, select "Reset" on the "Fine Sync"
Auto Sync Adjustment Using the
menu screen and press ENTER.
• The adjustable area of each item may be changed according to
Remote Control
the input signal.
1 Press AUTO SYNC button on the Remote Control.
Synchronized adjustment starts.
mark of the selected
Advertisement
Table of Contents
