Table of Contents
Advertisement
Adjusting the Computer and DVD/DTV Images
2,3,4
On-screen Display
2
3
E-33
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the DMD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust "Clock", "Phase",
"H-Pos" and "V-Pos" for the optimum computer image.
Description of Adjustment Items
1, 5
Selected item
Clock
Phase
H-Pos
V-Pos
Reset
• "Clock", "Phase", "H-Pos" and "V-Pos" cannot be used in the
• Computer image adjustments can be made easily by pressing
• To reset all adjustment items, select "Reset" on the "Fine Sync"
• The adjustable area of each item may be changed according to
Description
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
Centers the on-screen image by moving it up or down.
All computer image adjustment items are returned to the factory
preset settings.
DIGITAL INPUT mode and the Component mode.
AUTO SYNC (
) on the remote control. See page 35 for details.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/
to display the "Fine Sync" menu
screen.
3 Press
/
to select a specific adjustment item.
4 Press
/
to move the
adjustment item to the desired setting.
5 To exit the menu screen, press MENU.
menu screen and press ENTER.
the input signal.
mark of the selected
Advertisement
Table of Contents
