Adjusting The Computer And Dvd/Dtv Images - Sharp DT-200 Operation Manual

Adjusting the Computer and DVD/DTV Images

2,3,4
On-screen Display
2
3
E-33
DT-200(E)#p33.p65
1, 5
33
When displaying computer patterns which are very
detailed (tiling, vertical stripes, etc.), interference may
occur between the DMD pixels, causing flickering,
vertical stripes, or contrast irregularities in portions of
the screen. Should this occur, adjust "Clock", "Phase",
"H-Pos" and "V-Pos" for the optimum computer image.
Description of Adjustment Items
Selected item Description
Clock Adjusts vertical noise.
Phase Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos Centers the on-screen image by moving it to the left or right.
V-Pos Centers the on-screen image by moving it up or down.
Reset All computer image adjustment items are returned to the factory
preset settings.
• "Clock", "Phase", "H-Pos" and "V-Pos" cannot be used in the
DIGITAL INPUT mode and the Component mode.
• Computer image adjustments can be made easily by pressing
AUTO SYNC ( ) on the remote control. See page 35 for details.
1 Press MENU. The "Picture" menu screen appears.
2 Press
/ to display the "Fine Sync" menu
screen.
3 Press
/ to select a specific adjustment item.
4 Press
/ to move the
adjustment item to the desired setting.
5 To exit the menu screen, press MENU.
• To reset all adjustment items, select "Reset" on the "Fine Sync"
menu screen and press ENTER.
• The adjustable area of each item may be changed according to
the input signal.
02.11.21, 11:44 AM
mark of the selected