Advertisement
(Birch - sku# 94500982) (Oak - sku# 94500983).
11. Detail the burner with Rock Wool (included with the fireplace). The included rock wool is placed on
top of the burner to provide a realistic ember glow from on the burner. The Rockwool can be
applied in a relatively thick layer. The best method for applying the rock wool is to brush it onto the
burner. Compress a clump of Rockwool between your thumb and forefinger. Use a stiff brush to apply
Rockwool fibers onto the burner. You will not need to use the entire bag of Rockwool, save the
remainder for future use.
12. Place log #7 as shown below. There is a hole on the charred end of the log that rests on a locating pin on the
right end of log #1(see below). The other end of log #7 rests on the right end of log# 3. Rotate the lower
portion of the log until it is in contact with the fireback.
Page 8 of 10
4237 EG - Oak & Birch Log Set
17602208 —9/15/2021
© Travis Industries, Inc.
Advertisement
