Advertisement
(Birch - sku# 94500982) (Oak - sku# 94500983).
5. Place log #2 on the front burner. The notch on the bottom left of the log rests on the grate. The hole
on the right end of the log rests on the locating pin just left of the center of the burner. Push the log
backward until it is in contact with the rear burner.
NOTE: Make sure the log does not obstruct any burner holes.
6. Place log #3 as shown below. The notch on the bottom right of the log rests on the grate. The hole
in the left bottom of the log rests on the locating pin just right of the center of the burner. Push the log
backward until it is in contact with the sloped portion of the rear burner. Make sure burner holes are
not obstructed.
Page 5 of 10
4237 EG - Oak & Birch Log Set
17602208 —9/15/2021
© Travis Industries, Inc.
Advertisement
