Table of Contents
Advertisement
2.2 Technical Specifications
Processors
NXP i.MX 8M Plus Family:
-
Quad - 4x (or Dual
2x) Cortex®-A53 cores up to 1.8GHz, Cortex®-M7
core up to 800MHz, Full featured
-
Quad - 4x Cortex®-A53 cores up to 1.8GHz, Cortex®-M7 core up to
800MHz, without Neural Processing Unit (NPU)
-
Quad Lite - 4x Cortex®-A53 cores up to 1.8GHz, Cortex®-M7 core up to
800MHz, without Hardware Video Codec (VPU), Neural Processing Unit
(NPU), and Image Sensor Processor (ISP)
Memory
Soldered Down LPDDR4-4000 memory, 32-bit interface, up to 6GB
Graphics
Integrated Graphics Processing Unit GC7000UL
-
supports 2 independent displays, OpenGL ES 3.0, Open CL 1.2, Vulkan.
Embedded VPU
-
supports H/W decoding of HEVC/H.265, AVC/H.264, VP8, VP9 0.2
-
supports H/W ecoding of HEVC/H.265, AVC/H.264
Video Interfaces
1 x HDMI
1 x LVDS 18/24-bit Single/Dual Channel (factory option)
1 x eDP (factory alternative to one LVDS channel)
Video Resolution
HDMI, resolution up to 3840x2160 @ 30Hz
LVDS/eDP, resolution up to 1920x1080 @ 60Hz
Mass Storage
eMMC 5.1 Drive soldered on-board, up to 64GB
SD 1-bit/4-bit SDIO 3.0 interface
PCI Express
Up to 1 x PCI-e x1 Gen3 port
Networking
2 x Gigabit Ethernet interface
Optional WiFi 802.11a/b/g/n/ac + BT 5.1 module onboard
USB
1 x USB 2.0 Host or 1 x USB 2.0 Client port
USB 3.0 Hub onboard, makes available
-
2 x USB 2.0 ports
-
2 x USB 3.0 Superspeed ports
Audio
Up to 2 x I2S Audio interface (1 x I2S to BLE module as a factory alternative)
Serial ports
2 x UART Tx/Rx/RTS/CTS
2 x UART Tx/Rx
2 x CAN Bus
Other Interfaces
1 x 4-lanes (limited bandwidth) + 1 x 2-lanes CSI camera interfaces
I2C Bus
SPI interface
QuadSPI interface
14 x GPI/Os
Boot select signals
Power Management Signals (Standby not supported)
Power supply voltage: +5V
DC
RTC voltage: 3.3V
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version -40°C ÷ +85°C **.
"
Dimensions: 50 x82 mm (1.97
x 3.23
Supported Operating Systems:
Linux 64-bit
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.2
"
)
Advertisement
Table of Contents
