Table of Contents
Advertisement
1.4 Safety
The LEVY module uses only extremely low voltages.
While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components.
Always switch the power off, unplug the power supply unit and wait until the unit has cooled down, before handling the board and/or
connecting cables or other boards.
Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid
short circuits due to unwanted contacts with other board components.
If the board has become wet, never connect it to any external power supply unit or battery.
Check carefully that all cables are correctly connected and that they are not damaged.
1.5 Electrostatic Discharges
The LEVY module, like any other electronic product, is an electrostatic sensitive device: high voltages caused by static electricity could damage some or all the
devices and/or components on-board.
Whenever handling any of these boards, ground yourself through an anti-static wrist strap. Placement of the board on an anti-static
surface is also highly recommended.
1.6 RoHS compliance
The LEVY module is designed using RoHS compliant components and is manufactured on a lead-free production line. It is therefore fully RoHS compliant.
LEVY
LEVY User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.O. - Reviewed by N.P. - Copyright © 2022 SECO S.p.A.
7
Advertisement
Table of Contents
